TVIP boxes, which are used to access IPTV content, look like MAG boxes but run on different software. What is IPTV?
A common problem with TVIP boxes is that the remote control doesn’t work. In this article, we’ll show you how to fix a TVIP remote control that won’t work. How to setup IPTV on TVIP Box?
Before you start troubleshooting, you should do a quick check to see if the problem is caused by powering down the batteries. Press a few buttons on the remote control and watch to see if the red light blinks.
If the indicator doesn’t light up, it’s probably because the batteries are dead. As needed, replace the batteries. (If the indicator stays off even after the battery is changed, it means the remote control is broken and needs to be replaced.)
However, if the light does flicker but the remote control still won’t work, the problem is with the infrared (IR) part of the remote control. It is possible to solve this problem by following these steps.
How do I fix my TVIP IR remote?
Step 1: Press “Setting” (on the left side of S.INFO) and “Recall” (on the left side of “0”).
Step 2: Point the remote at the box and press and hold the “S.INFO” button for 10 seconds. Changing the IP remote code page will begin when this action is taken. Soon after 10 seconds have passed, you will see the message “IR remote code page has been modified.”
Please feel free to leave a comment if you need more help with the TVIP remote control.
IPTVSKYPRO